Blank European / UK Wall Plate

You can have these plates custom-cut to your specifications, using any variety of connectors you choose. A great solution for home or industrial/business networks!

The 76000 series faceplates are designed to attach directly to standard European Union/UK electrical boxes. Also proven as a practical solution for boats with onboard computers, they can make a normally exposed hole into a clean, sleek and easy-to-use connector interface. These faceplates differ from our US-standard low-voltage faceplates in the following ways:

• The dimensions of the 76000 are 8.5cm by 8.5cm
• The 2-gang version is secured by only two mounting screws
• The mounting holes are positioned horizontally rather than vertically

The 76000 series face plates will fit onto any standard-sized European Union/UK wall mount, similar to a European Union/UK outlet or light switch. Their rugged design and professional look make these plates an ideal solution for any wiring installation, especially when ordered with customized cutouts and mounts using DataPro's fabulous custom plate designer. Two standard screws are included with each plate, to fit any standard EU/UK surface box or mounting bracket.

Looking for standard US blank plates? Try our single-, double-, triple-, and quadruple-gang US plates.

MOUNTING OPTIONS

The 76000 series blank wall plates are designed to mount to a standard EU/UK electrical box with the provided screws.

A standard-sized single gang EU/UK Surface Pattress Box has the following measurements: WxHxD - 3.425" x 3.425" x VARIABLE (87mm x 87mm x 16/25/32/44mm) There are currently 4 available depths. Since these boxes are square, you can mount the plates with the screws aligned vertically or horizontally (depending on your preference).

A standard-sized double gang EU/UK Surface Pattress Box has the following measurements: WxHxD - 5.787" x 3.425" x VARIABLE (147mm x 87mm x 16/25/32/44mm) There are currently 4 available depths. These surface pattress boxes are equipped with two screw holes that are aligned horizontally to accommodate any standard EU/UK double-gang plate.

If an electrical box is impractical for your application, you can always simply mount the plate directly to a surface with the proper screws (not included). Just be sure that you hand-tighten the screws with a screwdriver to avoid damaging your plates. We do not recommend the use of an electrical driver for final tightening.

For information about selecting, installing, and using wall plates in your applications, see our Guide to Face Plates.

Part	Downloads
76000	Request Drawing	Model (STEP)

Specifications:

• 1 Gang Dimensions: 3.35" x 3.35" x 0.23" (8.5cm x 8.5cm x 6mm)
• 2 Gang Dimensions: 5.71" x 3.35" x 0.23" (14.5cm x 8.5cm x 6mm)