Panel-Mount Ethernet RJ45 Cat6 Extension Cable

Categories: > Patch Cables, Panel Mount Ethernet Cables
Offer a clean and organized network access port with our panel-mount 550MHz, 10-Gigabit Category-6 rated Ethernet extension cables. Features a female RJ45 connector on the panel end, and a standard male RJ45 connector on the other.

1771-0006C	Ethernet CAT-6 Panel-Mount Ext	6IN	$	10.45	825 in stock
1771-01C	Ethernet CAT-6 Panel-Mount Ext	1 ft	$	10.95	2035 in stock
1771-02C	Ethernet CAT-6 Panel-Mount Ext	2 ft	$	11.95	2532 in stock
1771-03C	Ethernet CAT-6 Panel-Mount Ext	3 ft	$	12.95	3091 in stock
1771-04C	Ethernet CAT-6 Panel-Mount Ext	4 ft	$	13.95	584 in stock
1771-06C	Ethernet CAT-6 Panel-Mount Ext	6 ft	$	14.95	1581 in stock
1771-10C	Ethernet CAT-6 Panel-Mount Ext	10 ft	$	18.95	740 in stock
1771-15C	Ethernet CAT-6 Panel-Mount Ext	15 ft	$	22.95	314 in stock
1771-25C	Ethernet CAT-6 Panel-Mount Ext	25 ft	$	30.95	295 in stock
1771-00C	Ethernet CAT-6 Panel-Mount Ext Custom build at $23.00 + $0.50 per foot. Some custom products may not be REACH compliant.

This 550MHz, 10-Gigabit panel-mount Ethernet cable is the perfect way to extend Cat6 to any plate, panel, or bulkhead. Requires no termination or punch-downs, and includes panel mounting hardware. Available in custom lengths.

Custom Lengths: Custom lengths up to 25ft (7.62m) will have the same appearance as pictured above, and are CL2-rated. Lengths over 25ft (7.62m) are unmolded (photo), and do not use CL2-rated wire by default. If you have special requirements for custom cables, just contact us!

Click here for PDF version

Drawings & Models:

Part	Downloads
1771	Drawing (PDF)	Model (STEP)

Related Products:

RJ45 Ethernet Cat-5e/Cat-6 Wall Plate

Dual Panel Mount Ethernet RJ45 Cat6 Extension Cable

RJ45 Ethernet Port Dust Plug

Coupler Panel-mount CAT6

Panel-Mount Ethernet RJ45 Cat5e Extension Cable

Features:

Mount and extend a Cat6 RJ45 Ethernet connection
CL2 rated for in-wall use
Compatible with all DataPro Ethernet wall plates and panels
Mounting hardware included

Specifications:

1x RJ45, Cat6, Male connector
1x RJ45, Cat6, panel-mount Female connector
550MHz Category-6 rated Ethernet
Panel or bulkhead-mountable molded PVC hood
Wire Gauge 24 AWG
Embedded 4-40 nuts with mounting screws included
Recommended screw installation: hand tighten, 2.0 in-lbs maximum torque
Allowable panel depth: 4.5mm (full mating)
Compatible with 10-Base-T, 100-Base-T, 1000-Base-T Gigabit, and 10G-Base-T 10-Gigabit networks
Backwards-compatible with Cat-5 and Cat-5e

Recently Viewed: