VGA over CAT5 Video Extender

The MSV-300 allows either a single computer or a KVM station to host two monitors, one local and one remote. With a low-cost CAT5 run between them, these units offer high-res VGA displays to be duplicated at long distances.

There is no software required, and power supplies for both units are included.

The local unit accepts a standard VGA-type signal from either a single computer or a KVM switch. The local unit has a VGA output monitor port, as well as an RJ45 port to connect to the remote unit.

Using any standard CAT5 Patch cable, the MSV-300 carries the signal from the local unit up to 130 meters (430 feet) to the remote unit. The remote unit also has a VGA port for an additional monitor.

Features:

• Split a VGA signal at 1600x1200 with inexpensive CAT5 wire.
• LED indicates power.
• Short/Long range switch to maximize signal quality.
• Extends 3.5mm audio as well

Specifications:

• Maximum Resolution: 1600x1200
• Transmission Distance: 130 meters (430 feet)
• Video Input: One DH15M VGA Male on local unit
• Video Output: One DH15F VGA Female on each unit
• Power Consumption: AC +9V 300mA (included)
• Weight: Local unit - 300 grams; Remote unit - 220 grams
• Dimensions: Local unit 130x100x35mm; Remote unit - 100x80x35mm