Non-Term VGA Spliced Panel-Mount Cable

Categories: > Spliced VGA Cables, VGA Panel-Mount Cables
The convenience of panel-mounting cables and non-terminated VGA in one amazing cable! This cable uses our special spliced-VGA breakaway for easy routing, and terminates to a panel-mount connector for installation on a faceplate or custom panel.

1151-CAP	VGA Spliced Cap For Conduit	EACH	$	14.95	9 in stock
1151-P	VGA Panel-Mount to DIN Stub	EACH	$	19.00	315 in stock
1154-10C	VGA Spliced Panel-Mount M/F	10 ft	$	39.00	43 in stock
1154-15C	VGA Spliced Panel-Mount M/F	15 ft	$	45.00	18 in stock
1154-20C	VGA Spliced Panel-Mount M/F	20 ft	$	50.00	25 in stock
1154-25C	VGA Spliced Panel-Mount M/F	25 ft	$	55.00	38 in stock
1154-30C	VGA Spliced Panel-Mount M/F	30 ft	$	59.00	Call for ETA
1154-40C	VGA Spliced Panel-Mount M/F	40 ft	$	69.00	Call for ETA
1154-50C	VGA Spliced Panel-Mount M/F	50 ft	$	79.00	5 in stock
1154-00C	VGA Spliced Panel-Mount M/F Custom build at $35.00 + $1.50 per foot. Some custom products may not be REACH compliant.
1154-00P	PM-F/M VGA Spliced Cab PLENUM Custom build at $90.00 + $3.80 per foot. Some custom products may not be REACH compliant.

The DataPro VGA panel-mount extension cable is used to extend the length of a VGA, XGA, or SVGA monitor cable, and is a non-terminated cable for use in wire runs through conduit, walls, boats, etc. The pigtail end is panel-mount VGA, and can terminate on a bulkhead or wallplate.

The first piece of the set has a male VGA connector and a locking male circular connector, available in various lengths. The second piece has a female circular and a panel-mount female VGA connector, and measures approximately 18 inches long. Both parts are included when you order.

By splicing the two VGA connectors with the circular connector, this cable can be run through wiring holes as small as 0.75" (19mm). Once reassembled, the splice connectors screw-lock together for a tight and secure seal.

Splice connector fits through 3/4" conduit!

The cable is made of 75 Ohm video-grade coaxial wire. This low-signal-loss cable allows lengths of up to 200 feet in most cases, with good signal strength.

We also offer spliced, non-terminated VGA cables in the following configurations:

If you don't need the non-terminated splice, see our standard VGA male/female extension cable.

Click here for PDF version

Please note that the splice connector does not conduct the ID and DDC channels (pins 5 and 9) of the VGA signal. Most computer monitors have no issue with this, but some television and projector models cannot detect a signal without these channels.

Drawings & Models:

Part	Downloads
1154	Drawing (PDF)	Model (STEP)

Related Products:

Non-Term VGA Spliced Cable (Male/Male)

Non-Term VGA Spliced Extension Cable

VGA Panel-Mount Extension Cable

VGA/DB9 Wall Plate - Single

Features:

Panel mountable female VGA Connector
Includes mounting hardware
CL2 rated for in-wall use
Gold-plated contacts
Low-loss cable allows lengths of up to 200 feet in most cases, with good strength and fidelity.
Splice connector fits through 3/4" (19mm) diameter conduit.

Specifications:

1x Panel Mountable Female DH15 VGA Connector
1x Male DH15 VGA Connector, No Pin #9
1x Male Circular 13 Pin Connector
1x Female Circular 13 Pin Connector
Splice connector diameter: 0.72" (18.3mm)
Wire Gauge 28 & 24 AWG
RoHS Compliant
CL2 Rated
Made of 75 Ohm video-grade coaxial wire
Triple-shielded mini-coax wire
Aluminum/Mylar Foil Wrap + Braided Shielding and Drain Wire
Includes removable male-female threaded hex standoffs for mounting
Allowable panel depth:
- 1.5mm (full mating)
- 2.0mm (max recommended)

Recently Viewed: