Non-Term VGA Spliced Cable (Male/Male)

Categories: > Spliced VGA Cables
Directly connect a video monitor and source through conduit or wiring holes, without any on-site termination! Our spliced VGA cables use a breakaway connector to run through tight spaces, and reterminate to 15-pin in a snap.

1151-10C	VGA Spliced Coaxial Cable M/M	10 ft	$	42.00	34 in stock
1151-15C	VGA Spliced Coaxial Cable M/M	15 ft	$	48.00	78 in stock
1151-20C	VGA Spliced Coaxial Cable M/M	20 ft	$	53.00	42 in stock
1151-25C	VGA Spliced Coaxial Cable M/M	25 ft	$	58.00	49 in stock
1151-30C	VGA Spliced Coaxial Cable M/M	30 ft	$	72.00	93 in stock
1151-40C	VGA Spliced Coaxial Cable M/M	40 ft	$	82.00	Call for ETA
1151-50C	VGA Spliced Coaxial Cable M/M	50 ft	$	85.00	23 in stock
1151-75C	VGA Spliced Coaxial Cable M/M	75 ft	$	102.00	21 in stock
1151-99C	VGA Spliced Coaxial Cable M/M	100 ft	$	122.00	10 in stock
1151-CAP	VGA Spliced Cap For Conduit	EACH	$	14.95	9 in stock
1151-M	VGA to DIN Cable Stub (M)	EACH	$	21.00	3 in stock
1151-00C	VGA Spliced Coaxial Cable M/M Custom build at $75.85 + $1.50 per foot. Some custom products may not be REACH compliant.

Please note that the splice connector does not conduct the ID and DDC channels (pins 5 and 9) of the VGA signal. Most computer monitors have no issue with this, but some television and projector models cannot detect a signal without these channels.

The DataPro SVGA spliced cable is used for long runs of VGA, XGA, or SVGA monitor cable, and is a non-terminated style cable for use in wire runs through conduit, walls, boats, etc.

The first piece of the set has a male VGA connector and a locking male circular connector, available in various lengths. The second piece has a female circular and a male VGA connector, and measures approximately 18 inches long. Both parts are included when you order.

By splicing the two VGA connectors with the circular connector, this cable can be run through wiring holes as small as 0.75" (19mm). Once reassembled, the splice connectors screw-lock together for a tight and secure seal.

Splice connector fits through 3/4" conduit!

The cable is made of 75 Ohm video-grade coaxial wire. This low-signal-loss cable allows lengths of up to 200 feet in most cases, with good signal strength.

We also offer spliced, non-terminated VGA cables in the following configurations:

If you don't need the non-terminated splice, see our standard VGA male/male cable.

Drawings & Models:

Part	Downloads
1151	Drawing (PDF)	Model (STEP)

Related Products:

Non-Term VGA Spliced Panel-Mount Cable

Non-Term VGA Spliced Extension Cable

VGA Cable DH15MM

Unterminated VGA Cable With Termination Kit

Features:

Gold-plated contacts
Low-loss cable allows lengths of up to 200 feet in most cases, with good strength and fidelity.
Splice connector fits through 3/4" (19mm) diameter conduit.

Specifications:

2x Male DH15 VGA Connectors, No Pin #9
1x Male Circular 13 Pin Connector
1x Female Circular 13 Pin Connector
Splice connector diameter: 0.72" (18.3mm)
Wire Gauge 28 & 24 AWG
RoHS Compliant
CL2 Rated
Made of 75 Ohm video-grade coaxial wire
Triple-shielded mini-coax wire

Recently Viewed: