Select a brand of rugged case!
Configure a Case Panel online
View Custom Options
Order a Blank Panel
Case Modifications
Request a Quote
View Custom Options
Order a Blank Panel
Case Modifications
Request a Quote
Mount electronics, instruments, and more in a Seahorse case with our custom Seahorse case panels. We offer two options for this process. The first is through our online Custom Plate Creator. The Plate Creator allows panels to be previewed, quoted, and immediately ordered online. If you have a more specific design in mind, or need something our Plate Creator can't do, see below for details on submitting a custom design.
Perfect for:
- Ruggedizing existing systems
- Drone FPV ground stations
- Pyrotechnics firing panels
- Launch controllers
- Medical equipment integration
- Portable ventilators
- Emergency radio go-kits
- Chart recorders
- Cyberdecks
Custom Case Panels Gallery
Custom Designs & Drawings
If your project is more complex, you can start by downloading a PDF drawing or STEP file below. These can be used to develop a drawing of your panel. Then just
email or
give us a call
to get started. Our experienced sales staff can start with any kind of drawing or design.
See below for information on available materials, options, and common cutouts.
See below for information on available materials, options, and common cutouts.
| Part | Fits Case | Width | Height | Downloads | |
|---|---|---|---|---|---|
| PS-7150B | Seahorse SE120 Base | 8.29" | 5.76" |  Drawing (PDF) |  Model (STEP) |
| PS-7150T | Seahorse SE120 Lid | 8.04" | 5.54" | Drawing (PDF) | Model (STEP) |
| PS-7250B | Seahorse SE1220 Base | 26.6" | 20.4" | Drawing (PDF) | Model (STEP) |
| PS-7250T | Seahorse SE1220 Lid | 26.6" | 20.4" | Drawing (PDF) | Model (STEP) |
| PS-7350B | Seahorse SE300 Base | 10.08" | 7.88" | Drawing (PDF) | Model (STEP) |
| PS-7350T | Seahorse SE300 Lid | 9.82" | 7.71" | Drawing (PDF) | Model (STEP) |
| PS-7550B | Seahorse SE520/540 Base | 14.17" | 10.63" | Drawing (PDF) | Model (STEP) |
| PS-7550T | Seahorse SE520/540 Lid | 13.93" | 10.36" | Drawing (PDF) | Model (STEP) |
| PS-7750B | Seahorse SE710/720 Base | 19.14" | 14.09" | Drawing (PDF) | Model (STEP) |
| PS-7750T | Seahorse SE710/720 Lid | 18.88" | 13.84" | Drawing (PDF) | Model (STEP) |
| PS-7950B | Seahorse SE920 Base | 22.96" | 14.44" | Drawing (PDF) | Model (STEP) |
| PS-7950T | Seahorse SE920 Lid | 22.85" | 14.3" | Drawing (PDF) | Model (STEP) |
Available Options
DataPro offers a number of finishing and marking options, as well as accessories.
Marking & Labeling:
Logo Marking
We can convert, optimize, and laser mark your logo for sharp, professional branding.
Laser Marking
For clean lines and maximum precision, laser marking is the perfect solution. Take a look at our Laser Marking Sample Gallery
Engraving
This durable marking method looks great on any material with a contrasting surface treatment such as anodized aluminum or layered acrylic. For more information, see our Rotary vs Laser Engraving article.Finishing:
Anodizing
While pre-anodized aluminum is available, we can also anodize your panels post-cutting to provide a full-coverage durable finish.
Powder Coating
Protect your panel with a high-quality powder coat applied as a final step.
Painting
Get creative with painted finishes! Available in a range of colors and textures.Accessories:
Press-Fit Fasteners
Mount PCBs, attach mounting hardware, and more with press-fit fasteners built into your panel. Concealed-head and flush-head available. Flush-mount nuts available on panels 0.090" and thicker. Perfect for adding windows and vents too!
Captive Fasteners
Perfect for frequently-removed panels and components. These fasteners stay attached to the panel even when loosened, preventing loss or damage to equipment.
Switch Guards & Hardware
We carry switch guards, panel handles, fasteners, and more. Check out our Accessories & Hardware section, or contact us if you have something specific in mind.
Interior Sub-Panels
Add an interior sub-panel to hold electronics or parts, and help organize your case.Case Modifications:
Note: Case modification can compromise waterproofing, and will void the manufacturer's lifetime warranty. For more information see our Case Services page.
Side Cutouts
Make your case usable even when closed with cutouts on the left and right sides of the case.
Inlets & Side Panels
DataPro can produce nearly any kind of internal or external structure you may need to mount ports and electronics, including inlet boxes, internal partitions, and hinged panels.
LCD Screen Integration
Installing a display in your case can be a big project - clearances, cabling, and overall fit need to be perfect. Our engineering and design team can help ensure that the process goes smoothly. Questions about installing a display in your Pelican case? Check out our FAQ!
Keyboard and Control Integration
Create the ultimate clean install by integrating keyboards, joysticks, touchpads, and more directly into the panel. We can help with sourcing, clearances, power, and more.
Materials
We're happy to recommend the perfect material for your project. If you've got something specific in mind, we stock a variety of common materials in multiple colors and thicknesses, and can source nearly anything with a very short turnaround. If you don't see what you're looking for here, just contact us.
| 0.063" | 0.080" | 0.090" | 0.125" | |
|---|---|---|---|---|
| 5005 Aluminum Black Anodized |
• | • | • | |
| 5005 Aluminum Clear Anodized |
• | • | • | |
| 5005 Aluminum Raw/Unfinished |
• | |||
| 5052 Aluminum Raw/Unfinished - Contact us for anodizing and other finishing options |
• | • | • | |
| 6061 Aluminum Raw/Unfinished - Contact us for anodizing and other finishing options |
• | • | • | |
| Acrylic Matte or Glossy Black, 75% or 90% opaque White |
• | |||
| Layered Acrylic Black with White Core or White with Black Core |
• | |||
| Brass | • | • | • |
5005 Anodized Aluminum - Clear or Black
The material we use for our stock case panels. Anodizing is MIL-A-8625, Type II, Class 1 (Class 2 for Black).
5052 Aluminum - Unfinished
This bendable, weldable alloy is perfect for enclosures. Stocked unfinished for post-cut anodizing or powder coating.
6061 Aluminum - Unfinished
A popular and durable material that machines well and has high resistance to corrosion. While this high-strength aluminum isn't recommended for bending, it is heat-treatable and lightweight. Can be special ordered in MIL-A-8625, Type II, Class 1 (Class 2 for Black) anodizing.
Brass
A beautiful material that polishes up wonderfully and has antibacterial properties.
0.125" Acrylic
This acrylic material is lightweight and durable, with outstanding resistance to sunlight and weathering.
0.125" Layered Engraving Acrylic
Made of three layers, with a contrasting color sandwiched between two shell layers. This makes for excellent, high-contrast direct engraving. Available in a variety of colors.
Standard Cutouts
DataPro's standard plate and panel cutouts are designed to be compatible with our panel-mount cables and couplers.
Below you'll find a list of cutouts, their compatible components, and associated drawings. If you need something not listed here, please contact us!
